Treat rate of SERVO®-DS
will vary with the nature and severity of application. The dose
rate depends on the desired level of oxidation stability and
composition of the fuel.
| Form |
Liquid |
| Colour |
Colourless to Straw Yellow
|
| Specific
Gravity, @ 15.6ºC |
0.87 - 0.89 |
| Flash
Point, ºC Abel min. |
45 |
| Viscosity
@ 40ºC, cSt |
1.5 - 2.2 |
SERVO®-DS is readily soluble in HSD and other
distillate streams at relatively low temperature. Users may
also prepare stock blends by dissolving SERVO®-DS in any of the
diesel blending stream for accurate and low treat level of the
product.
| » |
Backed by IndianOil R&D
technology |
| » |
Follow up and trouble shooting
through expert technical support. |
| » |
In-plant optimisation of
SERVO®-DS improves shelf life of fuel both
during storage and in use. |
| » |
Optimal use of SERVO®-DS
minimizes the treat cost. |
| » |
Keep away from heat, sparks
and open flames. |
| » |
Keep container closed after
use. |
| » |
Use the product with adequate
ventilation. |
| » |
Observe the warning labels
on product container. |
| » |
Other normal precautions
for chemicals apply. |
| » |
Avoid breathing vapours
and contact with skin, eyes and clothing. |
| » |
Wash thoroughly after handling.
|
| » |
In case of eye/skin contact,
immediately flush with plenty of water for at least 15
minutes. |
| » |
Call a physician, if problem persists |
SERVO®-DS is available
in 190 kg MS drums. |
